Utility Structures Inc. | Traffic | Security

Company Info | What's New | Contacts

61 Bongard Avenue, Ottawa, Ontario, Canada K2E 6V2 • Tel: (613) 225-6398 • (613) 225-1681 • Toll Free: 1-800-267-6466

Security Barriers

Highway OPSD
Barriers

Protective Posts

Protective Bollards

Protective Posts

Click on Image to Enlarge and Print

AUTUMN RED – CODE AR

Polished – Code 2	Etched – Code 3	Exposed – Code 4

AZTEC JADE – CODE AJ

Polished – Code 2	Etched – Code 3	Exposed – Code 4

BLACK ECLIPSE – CODE BE

Polished – Code 2	Etched – Code 3	Exposed – Code 4

DARK BRONZE – CODE DB

Polished – Code 2	Etched – Code 3	Exposed – Code 4

DESERT ROSE – CODE DR

Polished – Code 2	Etched – Code 3	Exposed – Code 4

DESERT SAND – CODE DS

Polished – Code 2	Etched – Code 3	Exposed – Code 4

MIDNIGHT LACE – CODE ML

Polished – Code 2	Etched – Code 3	Exposed – Code 4

NATURAL GREY – CODE NG

Polished – Code 2	Etched – Code 3	Exposed – Code 4

ORIENTAL JADE – CODE OJ

Polished – Code 2	Etched – Code 3	Exposed – Code 4

SALT & PEPPER – CODE SP

Polished – Code 2	Etched – Code 3	Exposed – Code 4

SELUKI BRONZE – CODE SB

Polished – Code 2	Etched – Code 3	Exposed – Code 4

VENETIAN WHITE – CODE VW

Polished – Code 2	Etched – Code 3	Exposed – Code 4

FINISHES

There are four pole finishes to choose from, each offering a different texture to suit the application:

TYPE 1 – PLAIN GREY MOLD FINISH

This is typically used in combination with plain gray non-decorative concrete poles. Natural limestone aggregates and concrete sand combined with cement, to provide a mold finish used on our distribution, sports lighting, and gray round street light poles.

TYPE 2 – POLISHED FINISH

This surface finish is accomplished by polishing the face of the concrete pole by mechanical means. Diamond polishing discs work the surface to an ultra smooth finish. After polishing the face of the pole, a minimum of two coats of clear sealer are applied to further enhance the natural beauty of the stone.

TYPE 3 – ETCHED FINISH

This surface finish, as the name suggests is a semi-rough finish. The etching of the pole surface is accomplished by sand blasting the face of the pole. The sand blasting removes the outer layer of mortar, exposing the decorative aggregates beneath. As with the polished finish, a sealer is applied to enhance the look.

TYPE 4 – EXPOSED FINISH

This surface finish is a two-stage process. Initially the pole form is coated with a “surface retarder”, which delays the hardening of the thin outer layer of the concrete. After the pole is cured, the pole surface is pressure washed with water to expose the aggregate. This finish is a rough finish, with large portions of the aggregate showing. No sealers are typically applied to this pole.


	ABOUT OUR COLOURS & FINISHES The decorative pole finish is not a veneer or a painted finish. The entire concrete matrix is a combination of specialty decorative colored aggregates, pigments, and cement. The entire pole is spun cast with this concrete mix. The combination of various concrete mix designs and surface finishes provides the client with over 36 standard finishes (custom designs available upon request) to choose from.

POSITION REFERENCE OF OPTIONS CODE IN TYPICAL CATALOGUE NUMBER

CLICK HERE TO GO TO SPECIFYING INFORMATION AND POLE COMPARISON CHART